ST 350	35	TW	6	3	11.0	14.15
		IW	6	3	11.0	14.50
		SW	6	4	12.0	15.80
ST 500	50	TW	6	3	11.0	14.80
		IW	6	3	11.0	15.10
		SW	6	4	12.0	16.40
ST 630	63	TW	6	3	11.0	15.30
		IW	6	3	11.0	15.60
		SW	6	4	12.0	16.90
		IW-R	6	3	12.0	17.25
ST 800	80	TW	8	4	14.9	20.73
		IW	8	4	14.9	21.28
		SW	8	4	14.9	21.23
		IW-R	8	4	15.6	22.29
ST 1000	100	TW	8	4	14.9	21.58
		IW	8	4	14.9	21.13
		SW	8	4	14.9	22.08
		IW-R	8	4	15.6	23.14
ST 1250	125	TW	10	5	18.7	27.10
		IW	10	5	18.7	27.85
		SW	10	5	18.7	27.80
		IW-R	10	5	19.4	28.71
ST 1400	140	TW	10	5	18.7	27.80
		IW	10	5	18.7	28.55
		SW	10	5	18.7	28.50
		IW-R	10	5	19.4	29.21
ST 1600	160	TW	10	5	18.7	28.65
		IW	10	5	18.7	29.40
		SW	10	5	18.7	29.35
		IW-R	10	5	20.2	31.13
ST 1800	180	SW	10	5	18.7	30.20
		IW-R	10	5	20.2	32.33
ST 2000	200	SW	10	6	19.7	31.90
		IW-R	10	6	21.2	34.18
ST 2500	250	IW-R	11	7	24.8	41.30
ST 3150	315	IW-R	12	8	27.6	47.99

Covering thicknesses and widths in the table are recommend values, in addition, required widths and thicknesses of belts can be mufactured upon request.

In the belt weight calculation, abrasion resistant cover rubber having density of 1.15 kg/mm/m2 (A) has been taken as base.

Belts are guarenteed for one year against defective productions and workmanship.

Rubber Conveyor Belts

WINDING DIAMETER | BELT CALCULATIONS | NOMENCLATURE OF OZERBAND BELTS | SPLICING OF STEEL CORD FABRIC BELTS

RECOMMENDED BELT SERIES FOR TEXTILE BELTS | RECOMMENDED BELT SERIES FOR STEEL CORD FABRIC BELTS

MINIMUM PULLEY DIAMETERS FOR TEXTILE AND STEEL CORD FABRIC BELTS (mm

home | products | contact | about | references | from chairman